SWING | with closed lift | Suspended staircase

The SWING staircase has a self-supporting open structure, made with cantilevered steps fixed directly into the wall by means of pins and glass railing

The installation requires the presence of load-bearing walls with a minimum thickness of 10-12 cm, made of solid bricks, reinforced concrete, poroton or structural hollow bricks. In the case of non-load-bearing walls it is possible to provide a side strip that can be visible or hidden, which will be used for fixing the steps.

The SWING staircase belongs to the EXCELLENCE collection. SWING is an open staircase that necessarily requires lateral load-bearing walls, comes with suspended steps fixed directly into the wall, versions with lateral support structure in painted iron or stainless steel are also available.

I lamellar beech steps are fixed to the structure by a special support.

The steps and raiser are in 60 mm thick, laminated beech, water painted in a wide range of colors

The closed riser is bolted to the step.

SWING’s style is important and elegant.

This staircase lends itself to serving private environments and the various finishes available both in wood and in iron parts can offer an excellent result for any style situation, modern, elegant and classic.

The modern open staircases from theExcellence collection by Cast Scale change the face of our home.

Step and closed riser in white lacquered wood

Step and closed riser in white lacquered wood

Suspended staircase with wooden step and with structure hooked directly into the wall

Suspended staircase with wooden step and with structure hooked directly into the wall and glass railing

Data sheet:
– Open staircase for interiors with suspended steps
– Staircase with steps fixed directly into the wall
– Version with wall side steps support structures available
– Available in the version with spacer feet between the steps on the inside
– Lamellar beech wood step th. 60 mm
– Available railing models:
The Infinity railingis made up of tempered and stratified glass panels made up of 2 sheets with a thickness of 10+10 mm, with fixing studs ø 45 mm in Aisi 304 stainless steel.
The Jazz railing in Aisi 304 stainless steel, available in the JazzIron version in painted iron, is fixed laterally to the step. Column for railing made up of 30×5 mm plates. Rods ø 8 mm, from n° 3 to 9 (the modularity of the rods allows to realize the protective barrier according to the customer’s tastes and can be modified at will). Tubular handrail ø 42 mm in stainless steel.
– Standard iron colors: embossed white ral 9010, embossed black ral 9005, embossed light gray ral 9006, embossed dark gray, dark brown, corten
– Standard wood tint colors: natural, oak, cherry, walnut, bleached, wenge, platinum gray, graphite black, brushed sand, brushed cream, brushed slate, brushed silver
– Water-based varnishing of wooden steps with smooth or brushed finish
– Width achievable from 60 cm up to 100 cm
– fixed treads as standard from 22 to 26 cm

Fill out and submit the form below to request a free quote.


    I consent to the processing of my personal data as expressed in the Privacy Policy .